Evil Paul's blog

TGIMBOEJ!

nobody@vox.com(Evil Paul) — Sat, 11 Jul 2009 19:39:15 +1000

Look what arrived in the mail recently. Yes! it's The Great Internet Migratory Box Of Electronics Junk! Let's peek inside shall we? OK, what shall I take? This stuff looks good ... Here's the stuff that was left after I took my goodies...

Read and post comments | Send to a friend

Arduinome 10h completed

nobody@vox.com(Evil Paul) — Sun, 08 Mar 2009 17:38:32 +1100

There it is, my DIY Arduinome 10h in all it's $2 off-brand tupperware glory! I have some nice bits of jarrah to make a decent enclosure later. I gave it a test run with the Amen breakbeat - it's a law, or an old town charter, or something. Clos...

Read and post comments | Send to a friend

Arduinome shields

nobody@vox.com(Evil Paul) — Tue, 30 Dec 2008 13:40:38 +1100

Yay! My arduinome shield boards arrived today. Thanks unsped! Praise "Bob"!

Read and post comments | Send to a friend

Feedback Looper

nobody@vox.com(Evil Paul) — Tue, 16 Sep 2008 00:23:25 +1000

My nicest looking project to date, a true bypass looper pedal with switchable feedback knob, sexxy purple swirl paintjob and slow colour-change LED I'm driving the LED with 2xAAA batteries, so it should take AGES to go flat - I did a test run ...

Read and post comments | Send to a friend

Arduinome

nobody@vox.com(Evil Paul) — Mon, 15 Sep 2008 22:27:41 +1000

Update 08 Mar 09: Have posted about the completed 10h here. Long time, no blag! Time to do some catch-up posts, but first, my latest project, which is always cooler and more interesting than whatever I did beforehand (to me anyway). I've been ...

Read and post comments | Send to a friend

DTMF 16 Channel sequencer

nobody@vox.com(Evil Paul) — Wed, 26 Mar 2008 21:09:40 +1100

I had some success today with breadboarding a DTMF based 16 channel audio sequencer. Thanks to John Schuch for the original idea and for drawing up the schematic. The basic idea is to be able to route an audio signal to any 1 of 16 speakers. You ...

Read and post comments | Send to a friend

Circuit Bending Challenge completed! [UPDATED 21Mar08]

nobody@vox.com(Evil Paul) — Sun, 28 Oct 2007 22:18:00 +1100

I ended up bending 2 of the things I got yesterday for the Circuit Bending Challenge. The driving toy was very straightforward, it had your standard black blob IC inside. I replaced the volume and pitch resistors with pots and added a switch for...

Read and post comments | Send to a friend

Circuit Bending Challenge

nobody@vox.com(Evil Paul) — Sat, 27 Oct 2007 14:35:15 +1000

I'm going to participate in the Circuit Bending Challenge tomorrow, so I hit the Op-Shops in preparation. The nice charitable Christian types that run them don't seem to like opening their stores on a Sunday for some reason.

Read and post comments | Send to a friend

Nibblers!

nobody@vox.com(Evil Paul) — Sat, 06 Oct 2007 12:46:40 +1000

I boxed these up pretty much straight after Electrofringe finished up, but I haven't had a chance to take any photos until today. I think they turned out very well and they feel quite good in your hands when your playing with them.

Read and post comments | Send to a friend

Electrofringe 2007 Day Two

nobody@vox.com(Evil Paul) — Fri, 28 Sep 2007 16:05:40 +1000

Sweet! They've scored a bunch of MacBooks to use for the Process Space. They have these funky transparent shells with a big colour printout inside, telling us that the laptops are sponsored by www.mac1.com.au .

Read and post comments | Send to a friend